Product gallery
More about this product
The entrance to the TrendVario 6300+ is at ground level. Unlike the other models, the system accommodates three vehicles one above the other. The parking spaces are moved vertically and horizontally and transported to the desired position. This means that they accommodate more cars within the same floor area. For maximum operating safety, the access level is secured from the entire system by gates. This also protects the vehicles from theft and vandalism. The semi-automatic parking system offers up to 29 parking spaces in total.
Specification
- For independent parking
- Can be combined with the TrendVario 6100, 6100+, 6300, 6300+ and 6200+
- 4 rows behind each other and 15 grids next to each other – up to 29 parking spaces are possible
- Total height: 335 cm to 460 cm in 5 cm increments
- Pit depth: 200 cm to 250 cm in 5 cm increments
- Vehicle dimensions: height 150 to 215 cm, length 500 to 520 cm
- Usable platform width: 230 cm to 270 cm
- Platform load: 2,000 kg per parking space, optionally 2,600 kg or max. 3,000 kg
- Individual parking spaces can even be loaded later on
- Horizontal access to all parking levels
- Platform coating: StandardGrip, optional AluLongLife or EasyWalk
- Operation via SmartChip, SmartPortable or SmartApp
* Assignment according to product data sheet
Field of application
- In residential and commercial buildings in large cities
- For additional parking spaces in office buildings or residential and commercial buildings
- To increase capacity in underground car parks or parking garages, e.g. of hotels
- More parking spaces for car dealerships, car rental companies or vintage car collections
- Ideal in the case of constructions abutting property lines
Specification – Gates
- Standard gates: KLAUS V-Gates, vertical gates, electrically
- Electrically sliding gates as an option
- Remote control as an option
- Gate frame made from extruded aluminium profiles with two vertical centre stay bars for the vertical gate and one vertical centre stay bar for the sliding gate
- Standard gating material: perforated aluminium plate
- Optional for sliding gates:
- Around 50 individual variations are possible in different materials and colours
- Glass (laminated safety glass), wood (Nordic spruce), aluminium, steel and many other options available.
- Interchangable panels and segments
KLAUS V-Gate – Vertical gates
Perforated aluminium plate
Type:
- Thickness 1,5 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
- Ventilation cross-section of the panelling approx. 30%
Perforated aluminium plate
Type:
- Thickness 2 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
- Ventilation cross-section of the panelling approx. 40%
Beaded steel plate
Type:
- Thickness 1 mm, hot-dip, layer thickness approx. 20 μm
- Additional powder coating
- Layer thickness approx. 25 μm on the outside and approx. 12 μm on the inside
- Many RAL colours available
Steel wire grating
Type:
- Mesh size 12×12 mm
- Thickness 2 mm, galvanized, layer thickness approx. 20 μm
- Ventilation cross-section of the panelling approx. 70%
Wooden panelling, Nordic spruce
Type
- Nordic spruce, grade A
- Vertical tongue and groove boards
Preimpregnated (colourless)
Plain aluminium sheet
Type:
- Thickness 2 mm, E6/EV1, anodized, layer thickness approx. 20 μm
Laminated safety glass
Type:
- LSG consisting of ESG 8/4 mm
The different product variants of the TrendVario 6300+
